that are produced at the time of fuel loading at truck in the loading rail terminal.
Equipment intended to minimise the emissions of VOCs in the delivery of flammable liquids,
Class I (gasoline), which are generated in the fuel loading at trucks.
Loads up to 17,171.19 gallons of fuel at a loading speed of 528.34 gl / min, for the highest
efficiency.
FEATURES
Characteristics:
Function: Capture, minimisation of evaporation and recovery of fuel vapoUr
Efficiency: 90 to 99% of total emissions
Operating temperature: -20° C
Time needed to reach the set-point: 14 minutes (approximately)
Dimensional
Height: 2,000 mm
Width: 1,200 mm
Length: 1,800 mm
Weight: 900 kg
EQUIPMENT COMPOSITION
01. CORE: Collection, Absorption and Condensation
It consists of components without electrical spark generation, vapor trapping, heat exchangers
and container. Two Cores for heat exchange system, covered with polyurethane blanket and
fairings in stainless steel sheet.
Dispose of:
– Camlock coupling connector for 3” steam inlet.
– Double internal tank of 52.8 gallons each for the condensed liquid.
– Liquid control level in the tank.
– Condensate liquid outlet valves to intermediate tank and registration outlet.
– Connection for 3” threaded vent pipe.
02. MODULE: Cold Generation Unit.
Classification of the compressor in class T3 temperature.
All electrical components manufactured with Ex certification.
Power compensation mechanisms.
INT69 EX2 electronic motor protection.
03. MODULE: Electrical control panel, box mount TMX-14.
(For equipment that works in explosive atmospheres).
04. MÓDULO 4: Almacenaje y transporte de la gasolina recuperada.
that it accumulates the recovered fuel and, by means of a pump, sends this by a closed tube to
another tank which is available to the Customer. The 50 gallons tank is equipped with two
mechanical buoys and one petrol pump.