UCTEC

The Model UCTEC (Condensing Unit for the Treatment of Pollutant Emissions) manufactured by RecVap® is equipment designed and developed for the recovery of vapours of volatile organic compounds that are, in liquid-vapour equilibrium in the air, that are contained within a closed tank, and are in variable levels of concentration.

This equipment is specially developed to capture 100% of the emissions that escape out of the vent valves that are being generated during the loading operations into the underground tanks, also the pressurisation of the tank during periods of little movement in the service station. These vapours escape to the atmosphere through the vent valve and the recovery of vapours that occurs during dispatch to clients with dispensers equipped with phase 2.

UCTEC treats the large flow of air and vapour during a discharge (up to 528.34 gl / min)

Our Products

  • UCTEC
  • UCTEC PH-2
  • Recvap Train Truck
  • Recvap Train Wagon

FEATURES

N

Characteristics

Color: Stainless Steel 404
Function: Capture, minimisation of evaporation and recovery of fuel vapor
Efficiency: 85 to 95% of total emissions
Operating temperature: -10 to -20 ° C
Time needed to reach the set-point: 14 minutes (approximate value)

N

Dimensional

Height: 1,800 mm
Width: 1,250 mm
Length: 1,250 mm
Weight: 410 kg

N

Electrical

Supply voltage: 440 V three-phase, 380 V three-phase or 220 v three-phase
Frequency: 60Hz
Installed power: 4 HP
Consumption: 350 to 500 kw / h per month

COMPOSITION OF THE EQUIPMENT

01. CORE: Collection, Absorption and Condensation

– T TIC hermetic thermocouple – Temperature Indicator and Controller – Full Gauge

– Recovered volume indicator, Inox 316-VISEX

– Gasoline Vapour Inlet Pipe

– Diesel Vapour Inlet Pipe (Optional)

– Tube for outlet of recovered liquid

– Safety drain

– Inox 304 steel fairing- USIMETAL

– Lifting rings- RUD – RS- M-12

– Finned heat exchangers

– Manometer for pressure control in the Core

– Three treated air outlets

– Connector for ground connection

02. COLD GENERATING UNIT (UGF): Developed especially for vapour recovery.

– Non-flammable refrigerant gas R404 A
– Power: 4 HP
– Low energy consumption

03. Elecrtical Panel

All electrical and electronic or electromagnetic components used are CE marked